Precise Alignment Super fast charger

Case Friendly

Thickness<=0.24 inches/0.6cm

Four Gear Levels to Adjust the Bottom Bracket

Suitable for phones 4.7″-7.5″
7mm thickness(No need to remove the case)

For Samsung:S21,S20,Galaxy S9+,Galaxy Note8,Galaxy,S8,Galaxy S8+
For iPhone:8/8 Plus,X/XR/XS Max,11，12，13
For Xiaomi:Xiaomi 11,10,9,Xiaomi MIX 2S Xiaomi MIX3
For Huawei:P40 Pro,P30 Pro,Mate 40/40 Pro,Mate 20,Mate 20 Pro UD,Mate 30/30 Pro

360°Rotation Support air outlet
Horizontal and vertical
but not for Round Fast locking with Ultra-sensitive Light Sensor and DC motor Automatic Opening and Closing When Mobile Phone Reaching

Mechanically Fixed Tail Hook

Truly anti-falling, Triangle Stability and Not Loose

Upgraded Chip,Smart and Auto stop,protection your phone well

8 Kinds of Charging Safety Protection
1.Overvoltage Protection
2.Overcurrent Protection
3.Overheating Protection
4.Short Circuit Protection
5.FOD
6.Overpower Protection
7.Electromagnetic Fileld Protection
8.Undervoltage Protection

Gear Teeth Tightly Occluded, Low Noise DC Motor

Precision structural design

Touch to open,take and put only need one hand

Back sensing area，touch to open,to Prevent accidental touch and unintentional opening and closing

Built-in Supercapacitor

Support Open or Close about Five Times even after Power off

Installation

1.Insert the air outlet clip ball together with the nut into the back of the main body of the bracket
Gently tighten the nut clockwisely
2.Rotate the nut at the ball head to adjust the length of the steel hook
3.Select the appropriate position to fasten the steel hook and tighten the nut at the ball head

Specification

Material:ABS
Input:5V/2A 9V/2A 12V/1.67A
Input interface:Type-C
Output:5W/7.5W/10W/15W(Max）
Suitable for:4.7-7.5 inch phones
Length:1m
Weight:About 160g